Working...

Your Cart

  • Your cart is empty

Back


Viewing 169 - 192 of 2429

Loading search results...

Convert?h=150&w=230

UPM

RCBS
Uniform loads require consistent powder charges, and many handloaders find a baffle helps them throw more consistent charges. The baffle is specifically designed for the RCBS Powder Measures and provides handloaders a uniform powder flow by controlling the gravity feed pressure of the powder column on the metering unit.
$8.99
Convert?h=150&w=230

ELD Match

Hornady
This is the Hornady developed Extremely Low Drag (ELD) Match Bullet. ELD Match bullets are technologically advanced, enhanced accuracy target bullets featuring Heat Shield tips with the perfect MEPLAT (tip point) combined with numerous design features that deliver the highest in class ballistic coefficients, superior accuracy and extreme consistency from bullet to bullet, lot to lot.
$41.99
Convert?h=150&w=230

Tube Feeders

RCBS
This caliber-specific Pistol Bullet feeder is designed to be used with any .875 -14 threaded progressive press. Each clear tube holds 20-25 bullets depending on weight and profile. The Tube PBF places the bullet into the case mouth, for proper alignment, to be seated at the next station. Another added benefit is that it can be used with jacketed, plated, cast or swaged lead bullets. Two bullet tubes are included with each unit, extra bullet tubes sold separately.
$12.99
Convert?h=150&w=230

Rifle

Barnes Bullets
Diameter: .375 - Weight: 235Gr - Length: 1.225 - S.D: 0.239 - B.C: 0.27 - Rounds Per Box: 50
$43.99
Convert?h=150&w=230

3-Die Carbide Set

RCBS
RCBS's 3-Die Carbide Sets is for straight-wall rifle and pistol cases. The Carbide Sizer Die sizes the case and de-primes (the carbide sizer ring eliminates the need to lubricate). Its Expander Die expands the case to the proper diameter to accept the bullet, and it imparts case mouth flare/bell for bullet feeding. The Seater Die seats the bullet and taper crimps.
$63.99
Convert?h=150&w=230

Primer Pocket

RCBS
This dedicated bench mounted Primer Pocket Swager Tool makes removal of primer pocket staking/crimp a simple task. It has become especially important due to the popularity of AR-platform rifles, which has resulted in much commercial ammunition having staked primer pockets. The rugged die cast aluminum base, hardened steel cam and foam padded grip handle require 35-percent less force than other tools to complete the job.
$97.99
Convert?h=150&w=230

Rifle

Barnes Bullets
Diameter: .224 - Weight: 62Gr - Twist: 1:9 - Rounds Per Box: 50
$27.99
Convert?h=150&w=230

Tube Feeders

RCBS
This caliber-specific Pistol Bullet feeder is designed to be used with any .875 -14 threaded progressive press. Each clear tube holds 20-25 bullets depending on weight and profile. The Tube PBF places the bullet into the case mouth, for proper alignment, to be seated at the next station. Another added benefit is that it can be used with jacketed, plated, cast or swaged lead bullets. Two bullet tubes are included with each unit, extra bullet tubes sold separately.
$34.99
Convert?h=150&w=230

Full Length Die Set

RCBS
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated.
$41.99
Convert?h=150&w=230

RS-5

RCBS
The RCBS Reloader Special-5 Single Stage Press is designed for a lifetime of reloading use. It has many desirable features for veteran and novice reloaders alike. These include the 3-3/4" hand clearance, 30 degree opening offset, a primer arm that allows the reloader to prime at the same time the case is being sized and the ability to convert the unit to a progressive press in the future.
$312.99
Convert?h=150&w=230

Tube Feeders

RCBS
This caliber-specific Pistol Bullet feeder is designed to be used with any .875 -14 threaded progressive press. Each clear tube holds 20-25 bullets depending on weight and profile. The Tube PBF places the bullet into the case mouth, for proper alignment, to be seated at the next station. Another added benefit is that it can be used with jacketed, plated, cast or swaged lead bullets. Two bullet tubes are included with each unit, extra bullet tubes sold separately.
$37.99
Convert?h=150&w=230

Rifle

Barnes Bullets
Diameter: .338 - Weight: 250Gr - Length: 1.549 - S.D: 0.313 - B.C: 0.425 - Rounds Per Box: 50
$45.99
Convert?h=150&w=230

Flash Hole

RCBS
Burrs left on the inside of the flash hole during manufacturing can cause erratic ignition. This handy tool automatically locates the hole and quickly removes the burr. A self-centering pilot collar with an adjustable stop allows quick alignment and prevents the removal of too much brass.
$14.99
Convert?h=150&w=230

Standard

RCBS
This collet is designed be used with the RCBS Standard Bullet puller to remove bullets from a wide range of cases.
$13.99
Convert?h=150&w=230

Full Length Die Set

RCBS
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated.
$43.99
Convert?h=150&w=230

Full Length Die Set

RCBS
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated.
$41.99
Convert?h=150&w=230

Trim Mate

RCBS
Case preparation is five times easier and faster with the Trim Mate Case Prep Center. Five gear-driven rotating heads turn the tedious task of chamfering, deburring, primer pocket cleaning, military crimp removal and flash hole deburring into child s play. Works great with the Trim Pro Power Case Trimmer so you can do case prep and trimming at the same time. Two stationary positions hold case neck brushes, and a cupped area holds dry case neck lube. The Prep Center includes large and small primer pocket brushes, inside chamfering and outside deburring tools, medium and small case neck brushes and a packet of dry case neck lube. Accessories such as Primer Pocket uniformers are manufactured with high speed tool steel cutters, and true the primer pocket wall and bottom. Military Crimp Removers are made with hardened steel cutters and ream out the crimp ring found in military cases.
$146.99
Convert?h=150&w=230

Rifle

Barnes Bullets
Diameter: .264 - Weight: 120Gr - Length: 1.252 - S.D: 0.246 - B.C: 0.381 - Rounds Per Box: 50
$33.99
Convert?h=150&w=230

Handle

RCBS
This large ergonomic handle can be used with a wide array of RCBS accessories.
$8.99
Convert?h=150&w=230

Rifle

Barnes Bullets
Diameter: .284 - Weight: 175Gr - Length: 1.517 - S.D: 0.31 - B.C: 0.417 - Rounds Per Box: 50
$36.99
Convert?h=150&w=230

Standard

RCBS
This collet is designed be used with the RCBS Standard Bullet puller to remove bullets from a wide range of cases.
$13.99
Convert?h=150&w=230

Super Shock

Hornady
Streamlined for ultra-flat trajectories, Hornady SST (Super Shock Tip) bullets contain a premium polymer tip for rapid expansion and maximum energy transfer. The match-grade jacket delivers surgical accuracy while heavy construction with InterLock feature delivers deep penetration every time.
$34.99
Convert?h=150&w=230

25 Round

Plano
Plano Ammunition Field Box 12 Gauge and 16 Gauge Shotgun Shell 25 Round Black and Green 6 Pack. Shotgun Shell Case 3.5'' 12 and 16 gauge. Holds up to 25 rounds of 12 or 16 gauge shells. Deeper design accommodates 3.5'' shells. Flip top provides easy access to shells. Black base with dark green top. 5.63''x5''x3.5''.
$22.99
Convert?h=150&w=230

3-Die Carbide Set

RCBS
RCBS's 3-Die Carbide Sets is for straight-wall rifle and pistol cases. The Carbide Sizer Die sizes the case and de-primes (the carbide sizer ring eliminates the need to lubricate). Its Expander Die expands the case to the proper diameter to accept the bullet, and it imparts case mouth flare/bell for bullet feeding. The Seater Die seats the bullet and roll crimps.
$63.99